Why are bicycle helmets designed the way they are?

Q. Seems like a BMX/Skating/Skiing helmet affords a lot more protection than the cycle helmets that just sit on the top of your head. I would think if you fall going 30+mph you would need a little more

But I don't bike, so what do I know

Answer
Like all quality sports equipment, helmets are sport specific. For biking a helmets weight, air ventilation, streamlining, protection, and comfort are some of the many design priorities. But all helmets must meet specific government safety specifications for their intended uses.

It would be safer to wear a down hill ski helmet or a motor cycle helmet, but we would die from heat strokes for lack of air circulation! The weight of those helmets would tend to throw us off balance and cause neck and shoulder muscle fatigue. Both dangerous conditions for bicycle riders.

I have had two helmet related accidents. The $200 helmets were both totaled. Cheap at twice the price! Interestingly, I would bet that the $90 bike helmets would protect me as well. The extra expense buys- lighter weight, more air vents, and better fit and retention systems (and some style points too).

Hope this helped to answer your question.

Soccerref

Motor And Bicycle Helmets?

Q. How are those safety helmets differ from each other?

Answer
Motorcycle helmets must have a DOT approval label. They are designed (and tested) to protect from impacts at higher speeds than those attained by bicycle riders.
Bicycle rider helmets have a greater emphasis on light weight and flow-through ventilation.

In other words, a bicycle helmet does not provide adequate (or legal) protection for motorcyclists, and a motorcycle helmet is too heavy and hot for use on bicycles.

Powered by Yahoo! Answers

how do I sell a line of children bicycle helmets?

bicycle helmets design image

ppchen_200

I have an exclusive license to sell a line of uniquely designed and safe children bicycle helmets. Would like to now what is the best approach or channel to distribute these helmets. Any information appreciated.

Answer
First, if you want to sell in the U.S. the helmets must meet government safety rules. Contact the Consumer Product Safety Commission and make sure the helmets have met their requirements.

Second, most people will not buy a helmet unless it is ANSI or Snell approved. If your helmet is not, it will cost $$$ for the testing if you choose to have this certification.

Third, you will want to have excellent insurance coverage. Since you are new to this particular item the insurance companies will charge you top dollar until you get "experience".

Finally, you'll need to start knocking on doors and providing samples to dealers and distributors as well as attending safety and bicycle shows. Alternately, you might be able to talk a few local stores into carrying them on consignment until you get a name for yourself.

Yes, it is a long and expensive process, but if it was cheap and easy everyone would do it.

Can skateboard helmets be used for inline skate helmets?

Scrumdiliu

I know that there is a difference between bicycle helmets, skating helmets, skateboard helmets, and snowboarding helmets but I was wondering if skateboard helmets and skate helmets could be used as the same?

I am a new skater and I think it would be idea if I get skate pads, etc.

Also do you recommend a brand? I was looking at Walmart and they seemed pretty safe.

Answer
There are two types of helmets: Bicycle and Multisport.
The names don't really describe the differences but are based on history of their development.

Bicycle helmets are lighter and usually have more air vents to keep you cool. They are usually more aerodynamically shaped. They are designed for the types of accident you get while moving forward and are good for rec/fitness/race skating.

Multisport helmets are designed for protection when there is more risk of hitting the back of your head such as skateboarding or doing tricks on skates or bikes.
They tend to be hotter because of lack of vents. They are tend to have a round shape and cover the back and sides of the head. The lining is made to protect if you hit another object on the way down (like a rail for grinding).

All helmets are only designed for one hard hit. They may not appear to be damaged but they may not protect well against a second hit.

For your skates, get the helmet appropriate for the type of skating you will be doing.

This goes for your pads also. The pads for aggressive and freestyle skating are thicker and cover more area than for rec/fitness/race skating.

For rec/fitness/racing skating, wrist guards are really important. You will almost always slide on your hands. However, I wear aggressive glove style wrist guards because they cover more skin in order to keep it intact.
Knee pads are more optional for "straight ahead" skating. When (not if) you fall, you should be sliding instead of falling straight down. The pads keep the skin from being scraped up. I have found that the scrapes are just below the knee and not just in the area that the pads cover. However, scrapes there heal faster and are not as painful while healing than ones on your hand. Tegaderm is a wonderful way to cover this kind of scrape. It keeps it moist so that you don't have the pain that happens when dry scabs crack and peal. It also is waterproof, can stay on for a week, and can cover large areas.
I have yet to know anyone who has significantly scraped up an elbow in straight ahead skating.

Powered by Yahoo! Answers

Can skateboard helmets be used for inline skate helmets?

bicycle helmets design image

Scrumdiliu

I know that there is a difference between bicycle helmets, skating helmets, skateboard helmets, and snowboarding helmets but I was wondering if skateboard helmets and skate helmets could be used as the same?

I am a new skater and I think it would be idea if I get skate pads, etc.

Also do you recommend a brand? I was looking at Walmart and they seemed pretty safe.

Answer
There are two types of helmets: Bicycle and Multisport.
The names don't really describe the differences but are based on history of their development.

Bicycle helmets are lighter and usually have more air vents to keep you cool. They are usually more aerodynamically shaped. They are designed for the types of accident you get while moving forward and are good for rec/fitness/race skating.

Multisport helmets are designed for protection when there is more risk of hitting the back of your head such as skateboarding or doing tricks on skates or bikes.
They tend to be hotter because of lack of vents. They are tend to have a round shape and cover the back and sides of the head. The lining is made to protect if you hit another object on the way down (like a rail for grinding).

All helmets are only designed for one hard hit. They may not appear to be damaged but they may not protect well against a second hit.

For your skates, get the helmet appropriate for the type of skating you will be doing.

This goes for your pads also. The pads for aggressive and freestyle skating are thicker and cover more area than for rec/fitness/race skating.

For rec/fitness/racing skating, wrist guards are really important. You will almost always slide on your hands. However, I wear aggressive glove style wrist guards because they cover more skin in order to keep it intact.
Knee pads are more optional for "straight ahead" skating. When (not if) you fall, you should be sliding instead of falling straight down. The pads keep the skin from being scraped up. I have found that the scrapes are just below the knee and not just in the area that the pads cover. However, scrapes there heal faster and are not as painful while healing than ones on your hand. Tegaderm is a wonderful way to cover this kind of scrape. It keeps it moist so that you don't have the pain that happens when dry scabs crack and peal. It also is waterproof, can stay on for a week, and can cover large areas.
I have yet to know anyone who has significantly scraped up an elbow in straight ahead skating.

What's the difference between bicycle helmets and skating helmets?

Q. Because if you fall of a bicycle you could hurt your head the same way you could hurt your head while skating and falling on ice instead of the pavement.

Answer
Skating helmets are designed to take several impacts and cover more of the head. Cycling helmets are not designed for repeated impacts and are liter and better ventilated.

Powered by Yahoo! Answers